Small H2O Ripper

Description

MADE FROM: Beech
ACTION: Dive and rise
LENGTH AND WEIGHT:  6.5″  2.6 oz.
DEPTH: 2 to 5 feet
Soft, short taps/pulls make the H2O Ripper dive straight down. Pull or tap a little harder, it will go down and to one side. On the next pull, it goes to the other side….kind of a drunken walk-the-dog action. When you crank it back, it wobbles side-to-side like a crankbait. If you stop, it will rise slowly.
RUGGED BAIT CONSTRUCTION:
• 2 coats of thinned epoxy that soaks into and seals the wood
• 1 coat of primer
• Molded eyes
• Lexan lip
• Wolverine stainless triple split rings
• Eagle Claw 774 3/0 hooks
• Stainless steel screw eyes which are .072 diameter and 1 to 1 1/2″ long (glued in)
• Multiple coats of Epoxy

SEE IT IN ACTION: