MADE FROM: Beech
ACTION: Dive and rise
LENGTH AND WEIGHT: 7.5″ 4.2 oz.
DEPTH: 3 to 6 feet
Soft, short taps/pulls make the H2O Ripper dive straight down. Pull or tap a little harder, it will go down and to one side. On the next pull, it goes to the other side….kind of a drunken walk-the-dog action. When cranked back, it wobbles side-to-side like a crankbait. If you stop, it will rise slowly.
RUGGED BAIT CONSTRUCTION:
-2 coats of thinned epoxy that soaks into and seals the wood
-1 coat of primer
-Wolverine stainless triple split rings
-Eagle Claw 774 5/0 hooks
-Stainless steel screw eyes which are .092 diameter and 1 to 1 1/2″ long (glued in)
-Multiple coats of Epoxy
SEE IT IN ACTION: