Large H2O Ripper

Description

MADE FROM: Beech
ACTION: Dive and rise
LENGTH and WEIGHT:  8.5″    5.2 oz.
DEPTH: 4 to 8 feet
Soft, short taps/pulls make the H2O Ripper dive straight down. Pull or tap a little harder, it will go down and to one side. On the next pull, it goes to the other side….kind of a drunken walk-the-dog action. If you crank it back, it wobbles side to side like a crankbait. If you stop, it will rise slowly.
RUGGED BAIT CONSTRUCTION:
• 2 coats of thinned epoxy that soaks into and seals the wood
• 1 coat of primer
• Molded eyes
• Lexan lip
• Wolverine stainless triple split rings
• Eagle Claw 774 5/0 hooks
• Stainless steel screw eyes which are .092 diameter and 1 to 1 1/2″ long (glued in)
• Multiple coats of Epoxy

SEE IT IN ACTION: